Benjamin Moore
Benjamin Moore Muresco Ceiling White Flat Paint & Primer (258)
Starting at $18.49
Benjamin Moore Fresh Start Multi-Purpose Oil Based Primer
• Benefits •
• Features •
• Specification •
• Applies smoothly and resists spattering when applied with a roller
• Hides surface imperfections
• Tones down ceiling glare and provides maximum diffused light
A premium quality, acrylic coating that delivers excellent hide, rolls, and sprays on smoothly, resists spatter,ing and offers extended open time for an easier, more efficient application. Ideal on most types of interior ceilings, including textured ceilings.
Available Colors: White
Sheen (or Gloss): Flat
Cleanup: Soap and Water
Resin Type: Acrylic Latex
Recommended Use: Interior
MPI Rating:
VOC Level: 44.0
Benjamin Moore
Benjamin Moore FRESH START® Deck & Siding Exterior Primer (094)
Starting at $22.49
Benjamin Moore FRESH START® Deck & Siding Exterior Primer
• Benefits •
• Description •
• Specification •
• Exceptional adhesion abilities
• Ideal for tannin-rich woods like cedar and redwood.
• Suppresses and seals stains uniformly.
• Fast-drying – same day recoat
Outside priming of fresh or previously coated wood, under light colored solid stains, and where cedar and redwood bleeding may be an issue.
This alkyd primer for outdoor use is great for sealing new or previously coated wood. For projects where cedar or redwood bleeding is a concern, it provides excellent stain blocking.
Do not apply when air and surface temperatures are below 50 °F (10 °C). Apply one or two coats. For best results, use a Benjamin Moore® custom-blended china bristle or nylon/polyester brush, Benjamin Moore® roller, or a similar product. This product can also be sprayed.
Technical Data
White
Vehicle Type Alkyd
Pigment Type Titanium Dioxide
Volume Solids 56%
Coverage per Gallon at
Recommended Film Thickness 450 – 550 Sq. Ft.
Recommended Film
Thickness
– Wet 3.0 – 3.6 mils
– Dry 1.7 – 2.0 mils
Depending on surface texture and porosity. Be sure to estimate
the right amount of paint for the job. This will ensure color
uniformity and minimize the disposal of excess paint.
Dry Time @ 77 °F
(25 °C) @ 50% RH
– To Touch 6 Hours
– To Recoat 8 Hours
High humidity and cool temperatures will result in longer dry,
recoat and service times.
Dries By Evaporation, Oxidation
Viscosity 82 ± 2 KU
Flash Point Combustible
Gloss / Sheen Low Lustre (5 – 15 @ 60°)
Surface Temperature
at Application
– Min. 50 °F
– Max 90 °F
Thin With Do Not Thin
Clean Up Thinner Mineral Spirits
Weight Per Gallon 11.6 lbs
Storage Temperature – Min. 40 °F
– Max 90 °F
Volatile Organic Compounds (VOC)
343 Grams/Liter 2.8 Lbs./Gallon
Benjamin Moore
Insl-X Prime Lock Plus Primer
Starting at $15.99
$16.99
INSL-X Prime Lock Plus Primer
Prime Lock Plus Primer (PS-8000)
• Benefits •
• Description •
• Specification •
✔ Multi-Purpose, High-Hiding alkyd primer and sealer
✔ Superior Adhesion to glossy surfaces
✔ Fast drying and prevents color bleed-through
✔ Excellent enamel holdout
Prime Lock Plus is an alkyd primer, sealer, and stain blocker with a strong hiding power for interior usage as well as spot priming external surfaces.
Priming plaster, drywall, wood, and previously painted or varnished surfaces has never been easier. Any oil or latex paint can be used as a topcoat. It has great enamel holdout and won't raise the grain of the wood. It adheres well to both glossy and non-glossy surfaces. It effectively blocks bleeding stains like fire and smoke damage, water stains, cedar or redwood tannin stains, crayon, lipstick, inks, and much more. If there are any severe water stains or pine knots, you may need to apply another layer of Prime Lock Plus before applying the final coat. Under most wall coverings, it can also be used as a primer.
Available Colors: White
Sheen (or Gloss): Primer
Cleanup: Solvent
Resin Type: Alkyd
Recommended Use: Interior, Exterior
MPI Rating: 69
VOC Level: 323.0
Safety Data Sheet
Technical Data Sheet