Cabot Exterior Stains

Cabot Semi-Solid Oil-Based Deck and Siding Stain Neutral Base 1 gal. • Benefits • • Description • • Specification • • Highlight Enhance and protect the natural beauty of wood while adding a touch of color • Manufactured for increased durability • Oil-Based, Water Repellent • Useful for fence, siding, and decks • Excellent UV protection with a deep penetrating semi-solid finish • Resistant to scuffing and fading • LOW VOC • One coat Exterior Application Richly colored, deeply penetrating, oil-based Cabot® Semi-Solid Stain & Sealer Low VOC offers wood protection and long-lasting beauty. Compared to semi-transparent stains, this particular stain has more concealing power, yet its appealing finish brings out the texture's inherent attractiveness. Semi-Solid Deck Features Cabot Semi-Solid Deck & Siding Stains are deep penetrating linseed oil-based stains that provide long lasting beauty and wood protection, highlight the natural beauty of the wood's texture with a uniquely pigmented appearance. With their extra pigmentation, Cabot deck and siding stains are extremely durable and help protect wood against the sun's damaging ultraviolet rays. Coverage Spread rates will vary depending on the porosity of the surface. On smooth surfaces, 1400 series covers approximately 400-500 square feet per gallon, 17400 series covers approximately 250-350 square feet per gallon. Where to Use Cabot Semi-Solid Deck & Siding Stains are ideal for use on wood where hiding coverage is desired, yet penetrating wood protection is needed. They also provide an outstanding value as a one-coat finish for recoating previously semi-transparent-stained surfaces. Cabot Semi-Solid Deck & Siding Stains can be used on most types of smooth and rough exterior wood, including decks, siding, fences, log homes and roofs. They provide excellent results on weathered wood and well-seasoned lumber such as cedar, fir, pine, cypress, spruce, redwood and plywood panel siding. Preparing Your Surfaces Proper surface preparation is the key to maximum stain performance. The durability of this product can be impaired by an unsound or poorly prepared surface. It is very important that the surface be clean of all dirt, mildew stains, loose wood fibers and other foreign matter. In order to be effective, a stain must be able to penetrate. Surfaces must be structurally sound and absolutely dry. (Moisture content must be below 15%, or wood must be exposed to dry weather a minimum of 3 to 5 days.) Previously semi-transparent stained or weathered wood surfaces must be either sanded, scrubbed with a detergent solution or Cabot Problem-Solver® Wood Cleaner and a stiff bristle brush, or power washed to remove the surface layer of all loose wood fibers, dirt, mildew stains, chalky residue and other foreign matter. Use Cabot Problem-Solver Strippers (8004) to safely remove all stains and paints from wood surfaces. Use Cabot Problem-Solver Wood Brightener to easily remove nail and metal rust stains, and renew the wood's appearance. New smooth wood that is unseasoned or appears shiny should be allowed to weather sufficiently before staining, but generally no longer than three months. Application Stir thoroughly before and occasionally while using. If the job requires more than one batch, blend them together. Apply evenly with a brush to small sections. For best results, use a high quality pad applicator or stain brush. To avoid lap marks, start at one edge and follow through to the end of the boards. Restain depending on sun exposure and wear every 2-4 years (up to 1 year for Clear). Cleanup and Disposal 1400 series: Clean brushes and equipment with mineral spirits 17400 series: Before drying, clean brushes and equipment with soap and water. Use mineral spirits after drying. Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Close container when not in use. Danger: Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after each use, place rags, steel wool or waste in a sealed, water-filled metal container. Dispose of according to local regulations. Brand Name: Cabot Sub Brand: Low VOC Transparency: Semi-Solid Tintable: Yes Color: Neutral Base Base Type: Oil-Based Product Type: Deck and Siding Stain Container Size: 1 gal UV Resistant: Yes Application Method: Brush/Pad/Spray Water Repellent: Yes VOC Level: 250 g/L Sealer: Yes Coverage Area: 250-350 sq ft Recommended Surface: Deck/Siding/Fence Full Cure Time: 48 hr Color Family: Tintable Base Clean up: Soap and Water Technical Data Sheet

Cabot O.V.T. Solid Tintable Oil-Based Stain 1 gal. • Benefits • • Description • • Specification • ✔️ Protects and Enhances the Natural Beauty of Wood ✔️ Oil-based and for maximum coverage, it's heavily pigmented. ✔️ Unlimited amounts of color matching Cabot O.V.T. solid color oil stains combine the greatest aspects of stain and paint in one product. These stains are made up of a combination of strong alkyd resin and linseed oil, and they provide excellent hiding power while also resisting cracking, peeling, and blistering. They give a water-repellent and long-lasting finish that keeps moisture out of the wood, reducing warping and checking. These stains protect new wood or already stained surfaces for a long time. Brand Name: Cabot Sub Brand: O.V.T. Transparency: Solid Tintable: Yes Color: 6701 White Base Base Type: Oil-Based Product Type: Stain Container Size: 1 gal UV Resistant: No Durability: 5 Years yr Application Method: Brush/Roller/Spray Water Repellent: Yes VOC Level: 250 g/L Sealer: Yes Coverage Area: 200-500 sq ft Recommended Surface: Finished Wood Full Cure Time: 30 day Color Family: Tintable Base

Cabot Semi-Transparent Redwood Oil-Based Penetrating Oil Deck and Siding Stain 1 gal. Wood stains or finishes are meant to be exposed to an outdoor environment, typically used for protecting wood siding or decking materials. Brand Name: Cabot Transparency: Transparent Color: Pacific Redwood Base Type: Oil-Based Coating Material: Penetrating Oil Product Type: Deck and Siding Stain Container Size: 1 gal. Water Repellent: Yes Coverage Area: 200-600 sq. ft. Sealer: Yes VOC Level: 550 g/L Full Cure Time: 30 day Recommended Surface: Decks Application Method: Brush/Roller/Spray Durability: 3 Years

Cabot Semi-Solid Stain White 0101 1 gal. Disc

Cabot Solid Tintable Oil-Based Deck Stain 1 gal. Oil-based, and acrylic water-based formulas available Richly pigmented for extra UV protection Ideal for decks, fencing, and patios The scuff-resistant finish made to be walked on Acrylic #1800 series requires two-coat application Oil series #1600 and #7600 recommend the one-coat application Not recommended for siding or incense cedar Unlimited color matching Do not thin Not intended for interior surfaces Cabot® Solid Color Decking Stains are extremely durable exterior stains for use on all wood decking, outdoor furniture, and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water repellent and fades resistant. Oil Series #1600 and #7600 contain all-natural pigment with 100% alkyd resin. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition. Approximately 150-250 square feet per gallon for Acrylic Series #1800. Oil Series #1600 and #7600 cover 400-500 sq. ft. per gallon on smooth surfaces; 250-350 sq. ft. per gallon on rough surfaces. These rates will vary depending upon the porosity and type of surface. Spread rates will increase when applying a second coat. Solid Color Decking Stains are ideal for use on most types of lumber including redwood, cypress, pine and fir, as well as pressure-treated wood. Oil decking stains #1600 and #7600 are also excellent for mahogany, cambara, meranti, and other exotic wood species. *Colors might not be exact due to screen resolution

Cabot Semi-Transparent Stain 0307 Deep Base Gallon. Cabot Semi-Transparent 0307 Deep Base Stain - Discontinued 

Cabot Deck Stain Solid Tintable Water-Based Acrylic Quart • Benefits • • Description • • Specification • • Quality and Durable acrylic water-based formula • Richly pigmented for extra UV protection • Ideal for decks, fencing, and patios • The scuff-resistant finish made to be walked on • Acrylic #1800 series requires two-coat application • Not recommended for siding or incense cedar • Unlimited color matching • Do not thin • Not intended for interior surfaces Cabot® Solid Color Decking Stains are extremely durable exterior stains for use on all wood decking, outdoor furniture, and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water repellent and fades resistant. Oil Series #1600 and #7600 contain all-natural pigment with 100% alkyd resin. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition. Coverage Approximately 150-250 square feet per gallon for Acrylic Series #1800. Oil Series #1600 and #7600 cover 400-500 sq. ft. per gallon on smooth surfaces; 250-350 sq. ft. per gallon on rough surfaces. These rates will vary depending upon the porosity and type of surface. Spread rates will increase when applying a second coat. WHERE TO USE Solid Color Decking Stains work well on a variety of woods, including redwood, cypress, pine, and fir, as well as pressure-treated hardwood. Mahogany, cambara, meranti, and other exotic wood species respond well to oil decking stains #1600 and #7600. Brand Name: Cabot Transparency: Solid Tintable: Yes Color: White Base Base Type: Water-Based Coating Material: Acrylic Product Type: Deck Stain Container Size: 1 qt Time Before Recoating: 4-6 hr UV Resistant: Yes Durability: 10 Years Application Method: Brush/Pad/Spray Water Repellent: Yes VOC Level: 100 g/L Coverage Area: 150-250 sq ft Recommended Surface: Decks Full Cure Time: 24 hr Color Family: Tintable Base Clean Up: Soap and Water

Cabot Straight Stain Brush 4 in. • Benefits • • Description • • Specification • ✔️100% Natural Bristle ✔️ Perfect for Use With Cabot Stains ✔️ 4 inch wide, covers most decking width   Are you looking for the best stain brush for your Cabot Stain? Look no further, This natural bristle stain brush has a threaded handle for the extension pole. Designed specifically for providing a fine, smooth finish with oil paints, stains, varnishes, shellacs, lacquers. When It's Time to Stain your deck or siding, pick up a Cabot Straight Stain Brush 4 in. Brand Name: Cabot Bristle Width: 4 in. Bristle Edge Shape: Straight Product Type: Stain Brush Designed for Use With: Finished Wood Surfaces Number in Package: 1 pk Handle Material: Plastic Packaging Type: Sleeve Bristle Material: Natural Bristle Blended bristles Threaded handle

Cabot Siding Stain Solid Tintable Water-Based Acrylic Quart • Benefits • • Description • • Specification • ✔Oil-based, and acrylic water-based formulas available ✔ Richly pigmented for extra UV protection ✔ Ideal for decks, fencing, and patios ✔ The scuff-resistant finish made to be walked on ✔ Acrylic #1800 series requires two-coat application ✔ Oil series #1600 and #7600 recommend the one-coat application ✔ Not recommended for siding or incense cedar ✔ Unlimited color matching ✔ Do not thin ✔ Not intended for interior surfaces   Cabot® Solid Color Decking Stains are extremely durable exterior stains for use on all wood decking, outdoor furniture, and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water repellent and fades resistant. Oil Series #1600 and #7600 contain all-natural pigment with 100% alkyd resin. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition. COVERAGE Approximately 150-250 square feet per gallon for Acrylic Series #1800. Oil Series #1600 and #7600 cover 400-500 sq. ft. per gallon on smooth surfaces; 250-350 sq. ft. per gallon on rough surfaces. These rates will vary depending upon the porosity and type of surface. Spread rates will increase when applying a second coat. WHERE TO USE Solid Color Decking Stains are ideal for use on most types of lumber including redwood, cypress, pine, and fir, as well as pressure-treated wood. Oil decking stains #1600 and #7600 are also excellent for mahogany, cambara, meranti, and other exotic wood species. Brand Name: Cabot Transparency: Solid Tintable: Yes Color: Solid Color Base Type: White Base Coating Material: Acrylic Product Type: Siding Stain Container Size: 1 gal Time Before Recoating: 4 hr UV Resistant: Yes Application Method: Brush/Roller/Spray Water Repellent: Yes VOC Level: 100 g/L Sealer: Yes Coverage Area: 200-400 sq ft Recommended Surface: Siding Full Cure Time: 30 day *Colors might not be exact due to screen resolution

• Benefits • • Description • • Specification • • Enhance the natural beauty of the exterior of your home while covering up imperfections • Provides a long-lasting finish which helps protect your siding from the elements • Ideal choice to use on deck rails, fencing, siding, clapboard, and many other exterior applications making it a versatile choice for all of your outdoor staining needs • Richly pigmented design allows for UV protection • Scuff-resistant finish protects your exterior siding from the elements • Tintable allowing you to choose from thousands of colors to match your home • Water-Based design allows for easy clean up with just soap and water Cabot Siding Stain Solid Tintable Water-Based Acrylic Gallon is the perfect choice for staining the exterior of your home. Cabot Siding Stain Solid Tintable Water-Based Acrylic Gallon provides the best protection and color retention for your wood siding and trim, a high-quality stain has been carefully designed. You may enjoy a lovely, freshly stained exterior in no time thanks to the water-based acrylic formula's simple application and rapid drying time. Cabot Siding Stain's resistance to fading, cracking, and peeling even under harsh weather conditions is one of its main advantages. This implies that you won't need to perform ongoing maintenance on your home's exterior for many years to come. Cabot Siding Stain offers exceptional performance in addition to being environmentally friendly. The water-based product has a low VOC content and can be used around kids and pets without causing harm. This makes it a fantastic option for homeowners searching for a sustainable and environmentally responsible option. You can select from a variety of colors since Cabot Siding Solid Stain is tintable which allows you to find the ideal color to match the exterior of your home. Cabot® Solid Color Decking Stains are extremely durable exterior stains for use on all wood decking, outdoor furniture, and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water-repellent and fades resistant. Oil Series #1600 and #7600 contain all-natural pigment with 100% alkyd resin. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition. COVERAGE Approximately 150-250 square feet per gallon for Acrylic Series #1800. Oil Series #1600 and #7600 cover 400-500 sq. ft. per gallon on smooth surfaces; 250-350 sq. ft. per gallon on rough surfaces. These rates will vary depending on the porosity and type of surface. Spread rates will increase when applying a second coat. WHERE TO USE Solid Color Decking Stains are ideal for use on most types of lumber including redwood, cypress, pine, and fir, as well as pressure-treated wood. Oil decking stains #1600 and #7600 are also excellent for mahogany, Bambara, meranti, and other exotic wood species. Brand Name: Cabot Sub Brand: Solid Color Acrylic Siding Stain Transparency: Solid Tintable: Yes Color: Neutral Base Coating Material: Acrylic Product Type: Siding Stain Container Size: 1 gal Time Before Recoating: 4-6 hr UV Resistant: Yes Durability: 20 Years Application Method: Brush/Roller/Spray Water Repellent: Yes VOC Level: 100 g/L Sealer: Yes Coverage Area: 300 sq ft Recommended Surface: Siding Color Family: Tintable Base

Cabot Semi-Transparent Natural Driftwood Gray Acrylic Bleaching Stain 1 gal.   • Benefits • • Description • • Specification • • Protects and enhances the natural beauty of wood • Gives a slight gray tone of color to the wood • Accelerates the natural weathering process of uncoated wood   Cabot bleaching stain is uniquely formulated to accelerate the natural weathering process of uncoated exterior wood. It contains a small amount of gray pigment and a chemical ingredient that actually bleaches the wood's surface. When first applied, this product gives a delicate gray tone and during the first few months' exposures, it gradually turns into a beautiful, natural driftwood gray color. This weathered effect, if derived by nature, would require many years of harsh exposure, which often turns wood dark and uneven in appearance. Cabot bleaching stain produces a self-protecting finish and achieves a uniform weathered look in only 3 to 6 months. Brand Name: Cabot Transparency: Semi-Transparent Color: Natural Driftwood Gray Coating Material: Acrylic Product Type: Bleaching Stain Container Size: 1 gal. Coverage Area: 350-450 sq. ft. Sealer: Yes Tintable: No Application Method: Brush/Pad/Spray Indoor or Outdoor: Outdoor VOC Level: 100 g/L UV Resistant: Yes

  Cabot Clear Water-Based Wood Protector 1 Gallon. • Benefits • • Description • • Specification • ✔️ All Natural Clear Pigment ✔️ UV protection ✔️ Brings out Natural Beauty of Wood While Protecting   Cabot Clear Wood Protector is a waterproofer with dual-action UV protection and a mold, mildew, and algae-resistant covering. It's simple to apply thanks to the real transparent finish and soap-and-water cleaning. Clear Wood Protector penetrates deeply into wood fibers to provide long-lasting protection, unlike wax-based clears that lie on top of the surface and fade away. Brand Name: Cabot Transparency: Transparent Tintable: No Color: 2101 Clear Base Type: Water-Based Coating Material: Penetrating Waterborne Product Type: Wood Protector Container Size: 1 gal. Full Cure Time: 24 hr. Recommended Surface: Finished Wood Indoor and Outdoor: Outdoor Coverage Area: 100-250 sq. ft. Sealer: Yes Water Repellent: Yes VOC Level: 100 g/L Durability: 3 Years year UV Resistant: Yes Application Method: Brush/Pad/Roller/Spray FLAO: Deep penetrating Mildew and algae resistant 100 VOC Formula Deep penetrating Mildew and algae resistant 100 VOC Formula

Cabot Semi-Transparent Deck and Siding Stain Redwood 1 gal. • Benefits • • Description • • Specification • ✔️ Deep-penetrating, linseed oil-based stain ✔️ Beautify and protect exterior woods ✔️ Formulated with non-fade, earth tone pigments to weather slowly over time. Cabot® Semi-Transparent Deck and Siding Stain is a deep-penetrating, linseed oil-based stain that beautify and protect exterior wood. This lightly pigmented stain enhances the natural beauty of the wood by allowing the grain, texture and color variations within the wood to show through. Will provide long-lasting, vaporpermeable protection that beautifies and enriches exterior wood surfaces. Formulated with non-fade, earth tone pigments to weather slowly over time. Brand Name: Cabot Transparency: Semi-Transparent Tintable: No Color: 16380 Redwood Base Type: Oil-Based Coating Material: Penetrating Oil Product Type: Deck and Siding Stain Container Size: 1 gal. Durability: 8 Years year Coverage Area: 250-350 sq. ft. Application Method: Brush/Sprayer VOC Level: 250 g/L Water Repellent: Yes UV Resistant: Yes Full Cure Time: 24 hr. Recommended Surface: Finished Wood Sealer: Yes Lightly pigmented for increased UV protection and color *Deep-penetrating *Fade resistant *Not intended for interior surfaces *

Cabot Semi-Transparent 16316 New Cedar Oil-Based Deck and Siding Stain 1 gal. • Benefits • • Description • • Specification • ✔️ Deep-penetrating, linseed oil-based stain ✔️ Beautify and protect exterior woods ✔️ Formulated with non-fade, earth tone pigments to weather slowly over time.   Cabot® Semi-Transparent Deck and Siding Stain is a deep-penetrating, linseed oil-based stain that beautify and protect exterior wood. This lightly pigmented stain enhances the natural beauty of the wood by allowing the grain, texture and color variations within the wood to show through. Will provide long-lasting, vaporpermeable protection that beautifies and enriches exterior wood surfaces. Formulated with non-fade, earth tone pigments to weather slowly over time. Brand Name: Cabot Transparency: Semi-Transparent Tintable: No Color: 16316 New Cedar Base Type: Oil-Based Coating Material: Penetrating Oil Product Type: Deck and Siding Stain Container Size: 1 gal. Application: Finished Wood Surfaces Recommended Surface: Finished Wood Coverage Area: 250-350 sq. ft. Water Repellent: Yes Application Method: Brush/Sprayer VOC Level: 250 g/L Full Cure Time: 30 day UV Resistant: Yes Gloss Sheen: Stain Indoor and Outdoor: Outdoor Durability: 8 Years year Sealer: Yes FLAO: Lightly pigmented for increased UV protection and color Deep-penetrating Fade resistant Not intended for interior surfaces Lightly pigmented for increased UV protection and color Deep-penetrating Fade resistant Not intended for interior surfaces

Cabot Transparent Deck and Siding Oil Stain Pacific Redwood 1 gal. • Benefits • • Description • • Specification • ✔️ Easy To Apply ✔️ Superior Natural Finish ✔️ Brings out Beauty of Wood while protecting Cabot® Wood Toned Deck & Siding Stain is made with a particular combination of resin and oil to give bare wood a great, natural finish. Cabot Wood Toned Stain is an easy-to-apply stain that gently darkens wood when initially applied, leaving a flat, translucent-toned surface that weathers to a natural wood color over time. Only for decks, siding, fences, and trim made of new or refurbished external wood. Also works well on shingles, shakes, and log cabins. Brand Name: Cabot Transparency: Transparent Tintable: No Color: Pacific Redwood Coating Material: Penetrating Oil Product Type: Deck and Siding Stain Container Size: 1 gal. Durability: 3 Years year Water Repellent: Yes Sealer: Yes Full Cure Time: 30 day Recommended Surface: Wood UV Resistant: No VOC Level: 250 g/L Application Method: Brush/Roller/Spray Coverage Area: 250-350 sq. ft.

Cabot Transparent Cedar Oil Deck and Siding Stain 1 gal. • Benefits • • Description • • Specification • • Keep the natural beauty of the wood and wood grain while protecting it from the elements leaving a flat, clear cedar tone • Deep Penetrating waterproofer • Dual Action UV protection • Mildew & Algae resistant coating Coverage: Approximately 100-250 sq. ft. (9.3-23.2 m2) per gallon. Cabot® Wood Toned Stain & Sealer Low VOC is made with a particular combination of resin and oil to give bare wood a superb, natural finish. Cabot Wood Toned Stain is easy to apply and gently darkens wood when initially applied, leaving a flat, translucent-toned finish that weathers to a natural wood color over time. Only for decks, siding, fences, and trim made of new or refurbished external wood. Also works well on shingles, shakes, and log cabins. Where to Apply Cabot Clear Wood Protector is ideal for use on new or refinished wood decks, porches, outdoor furniture, steps, and railings. Stone, masonry, brick, and concrete are also acceptable. Preparing your surface Check for dirt, mildew stains, loose wood fibers, and other foreign substances on the surface. The substance must be able to permeate in order to be effective. Surfaces must be stable and dry or wet. If the wood is moist, it should be clear of puddles and not feel damp. Cabot® Wood Cleaner, Wood Brightener, or Wood Strippers can be used to clean previously discolored or aged surfaces. Scrubbing with a firm bristle brush or sanding may be necessary to remove all loose wood fibers from untreated aged surfaces. Application Brushes, stain pads, a low-pressure garden sprayer, or professional spray equipment can be used. Always quickly back-brush after spraying. Always complete a small test area before proceeding to guarantee the correct look and drying time. Before and during use, vigorously shake and whisk. If the project calls for more than one container, mix them all together to maintain consistency. Depending on exposure, reapply every 1-2 years. When standing or walking on surfaces that are still damp after applying Cabot Clear Wood Protector, exercise caution since the surface may be slippery. Cleanup and Disposal Clean brushes and equipment with soap and water. Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Brand Name: Cabot Sub Brand: Wood Toned Stain & Sealer Low VOC Transparency: Transparent Tintable: No Color: Cedar Base Type: Oil-Based Product Type: Deck and Siding Stain Container Size: 1 gal UV Resistant: No Durability: 3 Years Application Method: Brush/Sprayer Water Repellent: Yes VOC Level: 250 g/L Sealer: Yes Coverage Area: 250-350 sq ft Recommended Surface: Deck/Siding Full Cure Time: 24 hr Color Family: Brown Clean Up: Soap and Water Safety Data Sheet Here

Cabot Australian Timber Oil Exterior Stain Natural • Benefits • • Description • • Specification • ✔️ UV Absorbing Surface ✔️ Rich Color brings out the Natural Beauty Of Wood ✔️ Resists scuffing and scraping   Cabot Australian timber oil for decks, siding, railings, and outdoor furniture is a special blend of oils designed to protect dense tallow wood, cambara, and merbau from the harsh Australian elements. To enhance natural wood depth and patina, Australian timber oil penetrates deep into dense, resin-rich woods. Australian timber oil provides three-way oil protection as well as a beautiful hardwood stain. It contains a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability, and pure South American Tung oil for color depth and water repellency. Complex translucent iron oxide pigments are also used to create a long-lasting UV-absorbing surface that is rich in color and dimension. After years of research and development, the result is an advanced-technology treatment with unrivaled performance that is designed to protect. Brand Name: Cabot Transparency: Transparent Tintable: No Color: Natural Base Type: Oil-Based Coating Material: Alkyd Product Type: Australian Timber Oil Container Size: 1 gal. Application Method: Brush/Sprayer Full Cure Time: 30 day Water Repellent: Yes Coverage Area: 400-600 sq. ft. Time Before Recoating: 48 hr. Sealer: Yes VOC Level: 550 g/L UV Resistant: Yes Recommended Surface: Decks/Outdoor Furniture/Railings/Siding Durability: 1-4 Years

Cabot Semi-Solid Tintable Deep Base Water-Based Acrylic Stain 1 gal. Benefits ✔️ Rich Colors  ✔️ Deep Penetrating into Wood ✔️ 100% Acrylic Resin-Based Description Cabot Semi-Solid Acrylic Stains are richly pigmented, penetrating, 100 percent acrylic resin-based stains that are unique to Cabot. They provide greater hiding power and color than semitransparent stains, yet their attractive flat finish highlights the natural beauty of the wood’s texture. These stains are environmentally friendly and equipment is easily cleaned with soap and water. Cabot Semi-Solid Acrylic Stains provide long-lasting, vapor-permeable protection that beautifies and enriches exterior wood surfaces. Containing a special acrylic resin, these products are ideal for all types of natural wood siding and shingles. Exceptional ultraviolet protection is achieved through the use of nonfade, earth tone pigments, in addition to the superior acrylic resin. Semi-Solid Acrylic Stains are formulated to weather slowly over time without cracking, peeling, or blistering. Specification Brand Name: Cabot Transparency: Semi-Solid Tintable: Yes Color: Deep Base Base Type: Water-Based Coating Material: Acrylic Product Type: Stain Container Size: 1 gal. Full Cure Time: 30 day Sealer: Yes Application Method: Brush/Pad/Spray Recommended Surface: Finished Wood Durability: 10 Years year Coverage Area: 100-300 sq. ft. Water Repellent: Yes VOC Level: 100 g/L UV Resistant: Yes

Cabot Crystal Clear Water-Based Waterproofer Wood Protector 1 gal. • Benefits • • Description • • Specification • ✔️ Long-lasting repellency ✔️ Penetrates & fills pores ✔️ Premium-grade, simple-to-use, silicone sealer ✔️ Clean up with soap & water ✔️ For wood, concrete, brick, masonry, etc. Cabot Waterproofing with surface protector is an advanced-technology, water-based silicone coating. This one-of-a-kind formulation is designed to provide unsurpassed waterproofing protection to a multitude of surfaces by coating the pores of the substrate with silicone. Brand Name: Cabot Sheen: Flat Color: Crystal Clear Base Type: Silicone Product Type: Waterproofing Sealer Container Size: 1 gal Indoor or Outdoor: Outdoor Full Cure Time: 1 hr Time Before Recoating: 1 day Color Family: Clear VOC Level: 100 g/L Paintable: Yes Coverage Area: 250 sq ft

Cabot Problem-Solver White Acrylic Primer 1 gal. • Benefits • • Description • • Specification • ✔️ Maximum performance and fast drying ✔️ Ideal for exterior base coats ✔️ Problem-Solver Primer yields outstanding results on siding, shingles, plywood and both smooth- and rough-sawn surfaces Cabot Problem-Solver Primer provides maximum performance through a faster-drying and higher-hiding formulation. An ideal exterior base coat for all types of solid stains and paints, it provides superior resistance to extractive bleeding and moisture problems. The 100 percent alkyd, oil-based formula dries in a fraction of the time compared to traditional linseed oil-based primers and both formulas facilitate the application of a quality finish coat within just a few hours. Problem-Solver Primer yields outstanding results on siding, shingles, plywood and both smooth- and rough-sawn surfaces. It is also suited for application over previously oil-based stained or painted surfaces. Brand Name: Cabot Sub Brand: Problem-Solver Color: White Coating Material: Acrylic Product Type: Primer Container Size: 1 gal. Indoor or Outdoor: Outdoor Full Cure Time: 8 hr. Stain Blocking: No Time Before Recoating: 8 hr. VOC Level: 100 g/L Clean Up: Soap and Water Tintable: Yes Coverage Area: 150-500 sq. ft. Recommended Surface: Wood Idea for use on siding, trim and decks *Locks in tannin bleed to block unsightly discoloration *High hiding *Faster drying *Exterior base coat for all types of solid stains and paints *Superior resistance to extractive bleeding and moisture problems

Cabot Australian Timber Oil Exterior Stain Mahogany Flame • Benefits • • Description • • Specification • • Protection: The stain is made to shield your deck from the elements, including moisture, rain, and sunlight, which can eventually cause fading and warping. • Color Enhancement: The Mahogany Flame stain color can bring out the wood's inherent beauty and give your deck a rich, inviting appearance. • Durability: The stain is made with premium oils that soak deeply into the fibers of the wood, offering protection and durability that lasts for a very long time. • Mold and mildew Resistant: The stain is made with mold inhibitors to help stop the formation of mold and mildew on the surface of the wood, preserving the cleanliness and freshness of your deck for a longer period of time. • Easy to Apply: The stain may be applied easily with a brush, roller, or sprayer and dries quickly, enabling the application of numerous coats in a single day. • Water-Repellent: The stain has a water-repellent quality that helps shield the wood from water damage and prolongs the life of the surface. • UV Protection: The stain has UV protection, which helps keep the wood from becoming bleached by the sun and turning gray over time. Are you searching for a premium deck stain to preserve and enhance the beauty of your wood deck? Cabot Australian Timber Oil Exterior Stain Mahogany Flame is the only option. For long-lasting protection and durability, this premium stain is precisely blended with premium oils that reach deep into the wood fibers. It shields your deck from the sun, rain, and dampness in addition to enhancing the wood's natural beauty with its warm and rich Mahogany Flame color. As a result of the stain's resistance to mold and mildew, your deck will continue to look fresher and cleaner for a longer period of time. For your deck, don't accept anything less than the best. Make your deck last for years to come with Cabot Australian Timber Oil Exterior Stain Mahogany Flame's long-lasting protection and gorgeous, rich color. Available Locally at Gilford Hardware and Outdoor Power Equipment Brand Name: Cabot Transparency: Transparent Tintable: No Color: Mahogany Flame Base Type: Oil-Based Coating Material: Alkyd Product Type: Australian Timber Oil Container Size: 1 gal. Durability: 1-4 Years Recommended Surface: Decks/Outdoor Furniture/Railings/Siding UV Resistant: Yes Application Method: Brush/Sprayer Coverage Area: 400-600 sq. ft. VOC Level: 550 g/L Time Before Recoating: 48 hr. Sealer: Yes Water Repellent: Yes

Cabot Australian Timber Oil Exterior Stain Jarrah Brown • Benefits • • Description • • Specification • ✔️ UV Protection from Fading / Peeling ✔️ Oil Based ✔️ Rich Color brings out the natural beauty of wood   Cabot Australian Timber Oil for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallowwood, cambara and merbau from extreme Australian exposures. Australian Timber Oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure South American Tung oil for color depth and water repellency, Australian Timber Oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting UV absorbing surface rich with color and dimension. The result after years of development is an advanced-technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before. Brand Name: Cabot Transparency: Transparent Tintable: No Color: Jarrah Brown Base Type: Oil-Based Coating Material: Natural Oil/Waterborne Hybrid Product Type: Australian Timber Oil Container Size: 1 gal. Durability: 4 Years Recommended Surface: Decks/Outdoor Furniture/Railings/Siding Full Cure Time: 30 day VOC Level: 275 g/L Water Repellent: Yes Application Method: Brush/Sprayer Sealer: Yes UV Resistant: Yes Coverage Area: 250-350 sq. ft.

Cabot Australian Timber Oil Exterior Stain Amberwood • Benefits • • Description • • Specification • ✔️ Brings out Natural Beauty of Wood & Protects the Grain ✔️ Rich Color ✔️ UV Protected prevents fading

Cabot Australian Timber Oil Exterior Stain Honey Teak • Benefits • • Description • • Specification • ✔️ UV Absorbing Surface ✔️ Rich Color brings out Natural Beauty Of Wood ✔️ Resists scuffing and scraping   Cabot Australian timber oil for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallow wood, cambara and merbau from the extreme Australian exposures. Australian timber oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure South American Tung oil for color depth and water repellency, Australian timber oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting U.V absorbing surface rich with color and dimension. The result after years of development is an advanced-technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before. Brand Name: Cabot Transparency: Transparent Tintable: No Color: Honey Teak Base Type: Oil-Based Coating Material: Natural Oil/Waterborne Hybrid Product Type: Australian Timber Oil Container Size: 1 qt. Recommended Surface: Decks/Outdoor Furniture/Railings/Siding VOC Level: 550 g/L Coverage Area: 62.5-87.5 sq. ft. Full Cure Time: 30 day UV Resistant: Yes Sealer: Yes Durability: 1-4 Years Water Repellent: Yes Application Method: Brush/Sprayer